The GATE IN Cut Off 2024 will be made public by the Indian Institute of Science, Bengaluru, with the announcement of the results, which is anticipated in March. In order for applicants’ grades to be considered, they must receive the minimum scores required by the authorities—also referred to as the GATE 2024 cut-off for IN.
It is crucial to keep in mind that the GATE IN Cut-off 2024 could be affected by a variety of variables, including the overall number of applicants who took the instrumentation engineering exam, the degree of difficulty of the paper, the applicant’s category, and more. To learn more about the GATE IN Cutoff 2024, keep reading.
GATE IN Cut Off 2024
The GATE IN Cut Off 2024 will be made public online at gate2024.iisc.ac.in by the conducting body. Following the announcement of the category-specific cut-off marks by the authorities, candidates who sat the examination will have access to them. Candidates must receive a minimum score of the GATE IN Cut Off 2024 in order to be eligible to take the test.
The GATE Cut Off 2024 for Instrumentation Engineering Paper will be visible to students once the authorities have opened the link. Applicants can learn about trends in cut off variance by examining the GATE Instrumentation Engineering Cut-Off 2024 and previous year’s cut-off scores in this post.
Exams Overview for GATE IN Cut Off 2024
Students are waiting for the publication of the cutoff scores as the GATE Exam 2024 draws to a close in order to find out if they qualify for an exceptional professional opportunity. There will be two announcements regarding the GATE IN Cut Off 2024: the Qualifying GATE IN Cut Off and the Admission GATE IN Cut Off. The primary features of the GATE IN Cut Off 2024 are outlined in the table below.
Detailed Exam Overview for GATE IN Cut-Off 2024
Particulars | Details |
Paper Name | GATE IN 2024 |
GATE Full Form | Graduate Aptitude Test in Engineering |
Conducting Authority | IISc Bengaluru |
GATE 2024 IN Exam Date | February 4, 2024 |
Purpose of GATE Exam | Providing admission to higher education courses such as M.E., M.Tech., or Ph.D., as well as PSU recruitments |
Mode of Exam | Computer-Based-Test (CBT) |
Exam Duration | 3 Hours (180 Minutes) |
Number Of Questions | 65 |
Sections Distribution in GATE IN Paper 2024 | General Aptitude (GA) And Core Instrumentation Engineering Subjects |
Marks Distribution in GATE 2024 IN Paper | General Aptitude: 15 marks Subject-Specific Questions: 85 marks |
Total Marks | 100 |
Marking Scheme | 1 or 2 Marks Questions |
GATE IN Cut Off 2024 Release Date | Yet to Be Announced |
Expected GATE IN Cut Off 2024 | Provided Below |
GATE IN Cut Off 2024 Determining Factors | Difficulty Level of PaperTotal Number of Test TakersSeats Availability Within Participating InstitutesCategory of ApplicantsPrevious Year’s GATE IN Cut Off |
GATE 2024 Negative Marking | Yes, But for MCQs, Only |
GATE Scorecard Validity | 3 Years |
GATE 2024 Official Website | https://gate2024.iisc.ac.in/ |
Also read:-CTET Result 2024 Out at ctet.nic.in; Direct Link to Check Result Here
SBI Clerk Prelims Result 2024, sbi.co.in Junior Associate CutOff & Merit List Direct Link
Expected Cut Off for GATE IN 2024
After the results are declared, the exam-conducting body, IISc, Bengaluru, will make public the official cutoff date in March. Until then, candidates can review the table below to review the GATE IN Expected Cut Off 2024. It is crucial to realize that this is the anticipated cutoff determined by the GATE IN Paper Analysis 2024 and trends from prior years.
GATE IN Expected Cut Off for 2024
Paper code | Unreserved | OBC-(NCL)-EWS | SC/ST/PWD |
Instrumentation Engineering: IN | 43 | 39 | 29 |
Factors to Consider for the 2024 GATE IN Cut Off
The minimal score required to be eligible for CCMT counseling and admission to M.Tech, M.Sc., PhD, and other courses at IITs, NITs, CFTIs, and other participating universities is the GATE Instrumentation Engineering (IN) Cut Off 2024. Several factors decide the GATE IN Cut Off 2024, including:
- GATE IN 2024 Paper Difficulty Level: The paper’s level of difficulty affects the GATE IN Cut Off Marks. Lower cut-off marks will result from a challenging GATE IN Paper, and vice versa. The GATE Instrumentation Engineering Paper’s degree of difficulty can be determined with the use of the PW Team’s paper analysis.
- Number of Applicants: The GATE Paper cut-off marks are influenced by the number of candidates. When more people apply, the cutoff score rises, and when fewer applications are submitted, it falls.
- M.Tech Seats Available at Participating Institutions: A key factor in deciding the GATE IN Cut Off 2024 is the quantity of seats available at participating institutions for admission to ME/M. Tech/Ph.D. programs. The fewer seats available,
- They will be cut off more in proportion to the number of seats.
- Past Year’s Cut Off Patterns The GATE IN Cut Off 2024 is determined in part by the previous year’s cutoff marks. To have a thorough grasp of the cut off marks, candidates should review the previous year’s results, which are available here.
- Categories of Applicant GATE IN Cut Off 2024 may change based on the applicant’s category (SC, ST, and PwD). Candidates in these protected categories are therefore probably going to have cut-off scores that are marginally lower than those in the unreserved category.
Prior Years Trends for GATE IN Cutoff
For applicants who took the test in 2024, the GATE IN Previous Year’s Cut Off serves as a baseline, helping them to assess their competitiveness and set realistic expectations for the required score for admission. In addition, looking at previous year’s GATE IN cut offs aids test-ready students in understanding the level of competition they would face in the following year.
Using the GATE IN Previous Year Cut Off, aspirants can forecast the expected cut off marks by analyzing the trends in mark variance. On their official website, the authorities will declare the GATE IN Cut Off for each category for the academic year 2024. For the convenience of candidates, the GATE IN Cut Off category-wise data for the last ten years is provided here:
Also read:-SBI Clerk Prelims Result 2024, sbi.co.in Junior Associate CutOff & Merit List Direct Link
SBI Clerk Result 2024, Junior Associate Prelims Expected Cut-Off Score, Result Announcement Date
GATE IN Cut Off Previous Year’s GATE Instrumentation Engineering Cut Off
GATE IN Cut Off 2023 | |||
Paper Code and Name | Unreserved | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
GATE IN: Instrumentation Engineering | 34.8 | 31.3 | 23.2 |
GATE IN Cut Off 2022 | |||
GATE IN: Instrumentation Engineering | 35.0 | 30.0 | 22.0 |
GATE IN Cut Off 2021 | |||
GATE IN: Instrumentation Engineering | 36.0 | 32.0 | 24.0 |
GATE IN Cut Off 2020 | |||
GATE IN: Instrumentation Engineering | 34.6 | 31.1 | 23.0 |
GATE IN Cut Off 2019 | |||
GATE IN: Instrumentation Engineering | 31.9 | 28.7 | 21.3 |
GATE IN Cut Off 2018 | |||
GATE IN: Instrumentation Engineering | 37.1 | 33.3 | 24.7 |
GATE IN Cut Off 2017 | |||
GATE IN: Instrumentation Engineering | 34.60 | 31.10 | 23.00 |
GATE IN Cut Off 2016 | |||
GATE IN: Instrumentation Engineering | 31.6 | 28.4 | 21 |
GATE IN Cut Off 2015 | |||
GATE IN: Instrumentation Engineering | 25.45 | 22.9 | 16.96 |
Ways to Check GATE IN Cut Off 2024
Those who wish to verify the GATE 2024 Instrumentation Engineering Cut Off Marks should adhere to the procedures listed below.
Step 1: Go to gate2024.iisc.ac.in, the official website for GATE 2024.
Step 2: On the webpage, click the GATE 2024 Result Link.
Step 3: The GATE Cut Off 2024 for Instrumentation Engineering in all categories will be highlighted in a PDF file that loads onto the screen.
Step 4: Check out and get the GATE IN Cut Off 2024 PDF.
Also read:-Indian Coast Guard Navik GD Syllabus, Exam Pattern for 2024, Check Now
BTSC ANM Result 2024 Link, PDF Download @btsc.bih.nic.in
GATE IN Cut Off 2024: Eligibility vs. Admission Cut Off of the Gate In
The GATE IN Cut Off 2024 will include two sections: admission and qualifying. The differences between the two are explained below.
- Minimum score required to pass the GATE IN 2024 test is known as the qualifying GATE IN Cut Off 2024. IISc, Bengaluru will establish the qualifying cut off based on the overall exam performance of candidates, GATE IN cut-offs from prior years, application category, and total number of test takers.
- The minimum score required for admission to various universities offering programs in instrumentation engineering is known as the GATE IN Admission Cutoff 2024. Each college and institution will determine its own GATE IN Admission Cut Off 2024 based on the total number of seats available, the applicant’s category, and the volume of admission applications the institute has received.
Final Words
The GATE IN Cut Off 2024, which will be released by IISc Bengaluru, is a significant benchmark for applicants hoping for chances in further education and PSU recruitments in Instrumentation Engineering. The exam difficulty, the quantity of candidates, and historical patterns are some of the elements that will affect the cut-off marks, which will determine an applicant’s eligibility for the exam. It is estimated that 43 marks will be the cut-off for the unreserved category. Candidates must distinguish between qualifying and admission cut-offs; the former is the minimal score required to pass the GATE IN exam, while the latter varies between institutions according to a number of factors such application category and seat availability.
According to the summary of the GATE IN 2024 exam, it is a thorough examination designed to evaluate a candidate’s aptitude and fundamental subject knowledge in Instrumentation Engineering. MCQs will receive negative marking. Historical cut-off patterns indicate variations in the minimum score needed to pass, offering insights into the exam’s competitive environment. In order to assess their eligibility and make appropriate preparations for subsequent admission processes, candidates should monitor the official GATE website for updates regarding the announcement of the cut-off marks.
Comments are closed.